NEWS CENTER
Analysis on the material performance of plastic products company
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2016-10-27 17:48
- Views:
(Summary description)With the wide application of plastic products, you need to understand the relevant material properties when buying. Most of the plastic raw materials are extracted from some oils. The most familiar part of the PC material is extracted from petroleum. There is a smell of gasoline when burned; ABS is extracted from coal, and ABS will be soot when burned out; POM is extracted from natural gas, and POM will have a very smelly smell when burned. Gas smell.
Analysis on the material performance of plastic products company
(Summary description)With the wide application of plastic products, you need to understand the relevant material properties when buying. Most of the plastic raw materials are extracted from some oils. The most familiar part of the PC material is extracted from petroleum. There is a smell of gasoline when burned; ABS is extracted from coal, and ABS will be soot when burned out; POM is extracted from natural gas, and POM will have a very smelly smell when burned. Gas smell.
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2016-10-27 17:48
- Views:
With the widespread use of plastic products, it is necessary to purchase Understand the relevant material properties. Most of the plastic raw materials are extracted from some oils. The most familiar part of the PC material is extracted from petroleum. The PC material has a gasoline smell when it is burned; ABS is derived from coal. After being refined, ABS will be soot-like when burned out; POM is refined from natural gas, and POM will have a very smelly gas when burned out.
1. Plastic has good insulation against electricity, heat and sound : Electrical insulation, arc resistance, heat preservation, sound insulation, sound absorption, vibration absorption, excellent noise reduction performance.
2. The main ingredient of the plastic safety buckle material is a carbon compound .
3. Polymer: refers to the pure material produced by the polymerization process Also known as polymeric materials. Both natural and synthetic resins are macromolecular polymers, referred to as polymers.
4. Plastic safety buckle material: made of polymer synthetic resin (Polymer) as the main component, infiltrated with various auxiliary materials or additives, has plasticity and fluidity at a specific temperature and pressure, can be molded into a certain shape, and keeps the shape unchanged under certain conditions. Third, after injection molding, many plastics tend to leave a small amount of residue on the surface of the exhaust groove of the plastic mold, which is similar to plastic powder. When the time is long, over time, these residues will block the mold exhaust groove, making it difficult to exhaust gas. Therefore, the exhaust groove of the plastic mold should be cleaned in time.
Scan the QR code to read on your phone
Related information
Classification of protective film
"Unicorn" in the environmental protection new material industry-Shanghai Mochuan completes tens of millions of pre-A rounds of financing
Aluminum foil fiberglass cloth tape manufacturers use the Internet to create a new market high
About us
Recruitment
Contact us
ADD:Changxi Road, Yang Yuan Industrial Park, Xinzhuang, Changshu
Service hotline:0086 512-52478100
0086 512 52922210
FAX:086-0512-52181318
E-mail:csxmysj@126.com(Sales)
/ Putting people first
/ Leading in quality
/ Quality Service
Copyright © 2021 Changshu Xinmingyu New Material Technology Co., Ltd. All Right Reserved ICP: 苏ICP备19061273号 Powered by 300.cn
Copyright © 2019 Changshu Xinmingyu New Material Technology Co., Ltd. All Right Reserved
ICP: 苏ICP备09082390号-1
Powered by 300.cn